Showroom > special calipers

CENTER DISTANCE DIGITAL CALIPERS WITH AWL ANVILS

CENTER DISTANCE DIGITAL CALIPERS WITH AWL ANVILS
-Center distance between two holes or distance between one hole center to one edge of workpiece can be easily obtained by moving slider.
-With up-and-down movement on left side jaw, a center distance between step holes can be easily obtained.
-Can be used to measure the diameter of a big hole.
-Can measure dimention between two step section of workpiece.
-Upon specially request by customer when placing order, the anvil tips of calipers may supply with YG15 carbide tips. The hardness of carbide is over than HRC68 for easy scratching on workpiece.
-With LCD window displaying measuring value.
-With power on/off button.
-With ZERO button and can set displaying value to be zero at any position.
-With Metric/Inch measuring system interchange button.
-With Absolute/Comparison measurement interchange button, measuring way can be changed during measurement procedure.
-With start-value presetting function.
Range(mm) Resolution(mm/inch) H (mm) H1 (mm) D (mm) L (mm) Accuracy(mm)
20-150 0.01/0.0005 180 50 16 20 0.06
20-200 0.01/0.0005 180 50 16 20 0.06
20-300 0.01/0.0005 180 50 17 20 0.09
20-500 0.01/0.0005 216.5 61.5 25 20 0.09
 

Address:#1-1, Unit A, #F Building, Innovation Mansion, High-Tech Information Industry District, Guilin 541004, Guangxi, P. R. China
Tel: +86-773-5610399, 8998738, 8998728
Fax: +86-773-5610299
Email: info@pngindustrial.com, info@pngindustrial.cn