Showroom > general calipers

STAINLESS STEEL MONO-BLOCK VERNIER CALIPERS (Type I)

STAINLESS STEEL MONO-BLOCK VERNIER CALIPERS (Type I)
-Calipers are made with Mono-Block Vernier to promising measuring accuracy consistency during lifetime of caliper.

-For sizes whose is equal or bigger than 150mm, calipers have outside, inside, depth and step measurement function.

-Outside measuring faces of calipers are all proceeded with hand-lapping after precision grinding in order to promise its parrelelism and roughness requirements. 

-All other measuring faces except of outside measuring faces are proceeded with precision grinding in order to promise its parrelelism and roughness requirements. 

-All calipers are made of Stainless Steel.

-All calipers are strictly made according to Chinese National Standard GB21389-2008.

Range(mm) Grad(mm) A(mm) B(mm) C(mm) Accuracy (mm)
0-100 0.05 12.5 30 13 00.5
0-125 0.05 17.5 40 14.5
0-150 0.05 17.5 40 15.5
0-200 0.05 18.8 50 17
0-250 0.05 22.8 65 17 0.06
0-300 0.05 22.8 65 17
0-100 0.02 12.5 30 13 0.02
0-125 0.02 17.5 40 14.5 0.03
0-150 0.02 17.5 40 15.5
0-200 0.02 18.8 50 17
0-250 0.02 22.8 65 17 0.04
0-300 0.02 22.8 65 17
0-100 0.05/1/128 12.5 30 13 0.05
0-125 0.05/1/128 17.5 40 14.5
0-150 0.05/1/128 17.5 40 15.5
0-200 0.05/1/128 18.8 50 17
0-250 0.05/1/128 22.8 65 17 0.06
0-300 0.05/1/128 22.8 65 17
0-100 0.02/0.001 12.5 30 13 0.02
0-125 0.02/0.001 17.5 40 14.5 0.03
0-150 0.02/0.001 17.5 40 15.5
0-200 0.02/0.001 18.8 50 17
0-250 0.02/0.001 22.8 65 17 0.04
0-300 0.02/0.001 22.8 65 17
 

Address:#1-1, Unit A, #F Building, Innovation Mansion, High-Tech Information Industry District, Guilin 541004, Guangxi, P. R. China
Tel: +86-773-5610399, 8998738, 8998728
Fax: +86-773-5610299
Email: info@pngindustrial.com, info@pngindustrial.cn