Showroom > Wire Cutting Machine > Multi-cutting Wire Cutting Machine

Multi-cutting Wire Cutting Machine

Multi-cutting Wire Cutting Machine
Specification #1 Machine Layout Chart Consumptive Accessories

Wire (Molybdenum wire or Tungsten and Molybdenum alloy wire ) of P&G WEDM-HLWS is as electrode, working liquid as media. Electrical discharging happens between the electrode and the work piece by using of the high frequency impulse power and the high peak current to bring high heat and high energy to erode the work piece. It means our machine can proceed all kinds of work materials that are electrical conductive, like carbon steel, stainless steel, aluminum, carbide, copper and etc..

WEDM-HLWS wire cutting track is realized by the movement of working table on X-Y axis and U-V directions, and tapper cutting by wire is realized by the swaying head on upper machine arm of WEDM-HLWS.

Comparing with our WEDM, our WEDM-HLWS can realize multi-cutting during programming to improve workpiece roughness after machining. With this advantage, WEDM-HLWS can realize good roughness on cutting surfaces and promise cutting efficiency at the same time.

Comparing with WEDM-LWS, our WEDM-HLWS is produced with new design that makes machine to be easier operated and increases machine rigidity.

Functions of WEDM-LWS:
1. Automatic circular center positioning
2. Program editing by:
(a) N.C. code edit (G.M code)
(b) DXF edit (CAM, graphic transfer file)
(c) 3B code edit
3. Multi-cutting choice during machining
4. Forward or reverse orbital function
5. Automatic machining stop in case of wire electrode breaking
6. Dry run function
7. Start point or hold point return
8. Short-circuit interrupt protection & Auto. Stop
9. Wire electrode diameter and electric spark clearance compensation
10. Cutting path display

Address:#1-1, Unit A, #F Building, Innovation Mansion, High-Tech Information Industry District, Guilin 541004, Guangxi, P. R. China
Tel: +86-773-5610399, 8998738, 8998728
Fax: +86-773-5610299