Showroom > EDM > Specifications

High Precision Wire Cutting Machine

High Precision Wire Cutting Machine
Specification #1 Consumptive Accessories
 
Model No.

PG-25S

PG-32S

PG-40S

Working table travel (X, Y axis)

320*250mm

400*320mm

550*400mm

Max. cutting thickness

260mm

260mm

360mm

Max. size of workpiece

500*400mm

580*500mm

780*600mm

Max. weight of workpiece

250mm

350mm

500mm

Max. taper

10/60mm

Diameter of molybdenum wire electrode

Ø0.12-Ø0.18mm

Wire running speed

Max. 600 meters/min. with frequency control speed

Machining accuracy (cutting 10mm circle or square)

2um

Best cutting surface roughness

Ra0.8um

Max. cutting efficiency

200mm²/min.

Max. machining current

6A

Working liquid tank capacity

110 Liters

Working liquid

pure water with speical dielectric additive

Machine power supply

380 Volt. 3-phase , 50HZ
(208V or 480V,3-phase and 60HZ is available for choice)

Total power of Machine

2KVA

Working temperature

10-35

Working humidity

3-75% RH

Dimension of machine(L*W*H)

1730*1650*1900mm

1900*1750*1900mm

2200*1860*2200mm

Net weight of machine

1500KG

1700KG

2200KG

Standard accessories:

  1. P2 grade high precision ball screws on X,Y axis of working table
  2. Hi-Win Linear guiding way on X, Y axis of working table
  3. Grade P4 high precision bearing pairs on X,Y axis of working table
  4. Optical rulers for X, Y axes of working table
  5. Servo motor for X, Y axes of working table
  6. One set of 0.195mm ruby spray nozzle
  7. One roll of Ø0.18mm molybdenum electrode wire 2000 meters
  8. One can of dielectric additive for 70L working liquid making
  9. Working lamp
  10. Clamper
  11. Perpendicularity calibrator for molybdenum electrode wire
  12. Wire tension device
    Its used to tight molybdenum electrode wire during machine working.
  13. Wire setting device
    It is fixed at the rear end of the upper wire support. The molybdenum electrode wire reel is fixed on it for winding electrode wire on wire winding drum by motorized or manual way.
  14. Automatic Lubrication system
  15. Crank shaft: rotate the wire winding drum manually during winding electrode wire on it.
  16. Adjustable foundation bolt
  17. Tools kit
Tool name Quantity
Lubrication oil sprayer 1 pc
Cross screw driver 1 pc
Flat screw driver (big) 1 pc
Flat screw driver(small) 1 pc
Inner hexagon spanner 1 set
Tools for guiding pulley installation & disassembly 1 set
Adjustable spanner 1 pc
Wire-tighten steel bar 1 pc
 

Address:#1-1, Unit A, #F Building, Innovation Mansion, High-Tech Information Industry District, Guilin 541004, Guangxi, P. R. China
Tel: +86-773-5610399, 8998738, 8998728
Fax: +86-773-5610299
Email: info@pngindustrial.com, info@pngindustrial.cn