Showroom > EDM > Specifications

Economical Multi-cutting Wire Cutting Machine

Economical Multi-cutting Wire Cutting Machine
Specification #1 Specification #2 Specification #3 Machine Layout Chart Consumptive Accessories
 

Machine Model No.

Unit

PG-25M

PG-32M

PG-40M

Working table size

mm

520x340

600x380

710x710

Working table travel(X, Y axis)

mm

320x250

400x320

500x400

Control axes

 

X,Y,U,V

X,Y,U,V

X,Y,U,V

Max. cutting thickness

mm

400

400

400

Max. workpiece weight

kg

200

300

450

displacement of working table per round of hand wheel

mm

4

4

4

Pulse equivalent

mm

0.001

0.001

0.001

Best Machining accuracy (cutting 10mm circle of square)

mm

+/-0.012

+/-0.012

+/-0.012

Best cutting surface roughness

Ra (um)

1.2

1.2

1.2

Max. cutting speed

mm2/min

200

200

200

Dia. Molybdenum electrode wire

mm

0.12 - 0.20

0.12 - 0.20

0.12 - 0.20

Volume of working liquid tank

Liter

70

70

70

Working liquid tank pump

 

370W, 25L/min

370W, 25L/min

370W, 25L/min

Working liquid

 

pure water with special dielectric additive

Maximum wire winding length

meter

320

320

320

Motor of wire winding drum

AC

370w, 400rpm

370w, 1400rpm

370w, 1400rpm

Total Power

kw

4

4

4

Standard taper

 

6

6

6

Optional taper

 

 

15

15 or 30

Machine Power Supply

 

380 Volt. 3-phase , 50HZ
(208V or 480V,3-phase and 60HZ is available for choice)

Input/output method

 

Flash Disk

Display

 

14 LED color monitor

Graphic function

 

2D/3D display

Machine N.W

kg

930

1100

1300

Machine G.W

kg

980

1200

1420

Machine body dimension(L* W * H)

mm

1550x1100x1700

1650x1150x1800

1870x1250x1750

Controller dimension(L* W * H)

mm

730x660x1720

730x660x1720

730x660x1720

Working liquid tank dimension(L* W * H)

mm

730x480x700

730x480x700

730x480x700

  Standard Accessories:
  1. P2 grade high precision ball screws on X,Y axis of working table
  2. Hi-Win Linear guiding way on X, Y axis of working table
  3. Grade P4 high precision bearing pairs on X,Y axis of working table
  4. Enclosed housing for splash protection
  5. One roll of 0.18mm molybdenum electrode wire 2000 meters
  6. One set of 0.195mm ruby spray nozzle
  7. One can of dielectric additive for 70L working liquid making
  8. Working lamp
  9. Clamper
  10. Perpendicularity calibrator for molybdenum electrode wire
  11. Wire tension device: its used to tight molybdenum electrode wire during machine working.
  12. Wire setting device: it is fixed at the rear end of the upper wire support. The molybdenum electrode wire reel is fixed on it for winding electrode wire on wire winding drum by motorized or manual way.
  13. Manual hydraulic Lubrication oil box
  14. Crank shaft: rotate the wire winding drum manually during winding electrode wire on it.
  15. Adjustable foundation bolt
  16. Tools kit
Tool name Quantity
Lubrication oil sprayer 1 pc
Cross screw driver 1 pc
Flat screw driver (big) 1 pc
Flat screw driver(small) 1 pc
Inner hexagon spanner 1 set
Tools for guiding pulley installation & disassembly 1 set
Adjustable spanner 1 pc
Wire-tighten steel bar 1 pc
  Optional Accessories
  1. Swing structure for 15Taper cutting
  2. Swing structure for 30 Taper cutting
  3. Optical rulers for X, Y axis of working table
  4. Automatic lubrication system
  5. Motor driving system for upper wire supports position adjusting
    Note: For machines whose model is equal or bigger than PG-63M, motor driving system is a standard accessory.
  6. Warning lamp
  7. Photoelectric perpendicularity calibrator for molybdenum electrode wire
 

Address:#1-1, Unit A, #F Building, Innovation Mansion, High-Tech Information Industry District, Guilin 541004, Guangxi, P. R. China
Tel: +86-773-5610399, 8998738, 8998728
Fax: +86-773-5610299
Email: info@pngindustrial.com, info@pngindustrial.cn